Enhancing TMCC Signal Distribution
for two rail layouts  


Distributing the  TMCC signal to the tracks on a two rail system is more critical than a three rail system especially on a complex layout with several power feeds and an intricate track plan.  Here is a  network to distribute the signal to both rails to help keep it balanced so that is not degraded when an engine is turned around on the track. I have done extensive testing on my layout and found this works.

Three rail layouts may also benefit from this additional coupling to the center rail too.

This network is on both outputs of my Z4000
You can see the Command Base post on the left
Click on image for larger view.